显示标签为“Mitac bp-8050 Battery”的博文。显示所有博文
显示标签为“Mitac bp-8050 Battery”的博文。显示所有博文

2011年5月24日星期二

Lithium-ion batteries are widely used in consumer electronics

A new kind of lithium-ion battery holds much more energy than previous versions, while still working well at high temperatures. It could prove useful for hybrid and electric cars, where high-density batteries usually come with safety risks.Hp 182281-001 battery
Useing a graphite current collector and sodium imide in the battery's electrolyte. These materials enable the battery to last longer and withstand higher temperatures; Leyden has declined to discuss how it achieved higher energy densities.
The company says the battery has an energy density of 225 watt-hours per kilogram. This falls at the high-end range of laptop batteries, and roughly 50 percent higher than lithium-ion batteries used in electric vehicles. The four-year-old startup expects to see its cells used by a tablet PC maker later this year, says Leyden CEO Aakar Patel.
Lithium-ion batteries are widely used in consumer electronics, but design changes are needed to make sure they work safely in electric or hybrid cars. Carmakers are typically forced to use lower-density batteries, and to use electronics and cooling systems to ensure the battery cells don't run too hot. Tesla Motors, for example, uses batteries that are similar to those found in laptops to power its Roadster sports car. The company uses liquid cooling and thermal management electronics and software to prevent overheating and other problems.
A cathode material such as lithium-iron phosphate is sometimes used for electric vehicle batteries because it can withstand high temperatures. The trade-off is that it has a relatively low energy density—around 140 watt-hours per kilogram.
Leyden focuses on the electrolyte and current collector, because the two affect the performance of the cathode and anode and help to determine the longevity and stability of a battery, says Patel. The results are batteries that work just as well in temperatures up to 60 °C, he adds.

Leyden's battery replaces lithium hexafluorophosphate, one of the components of a lithium-ion battery, with sodium imide. Unlike lithium hexafluorophosphate, it does not react with water inside the battery cell, a reaction that significantly degrades the cycle life of a battery. Lithium hexafluorophosphate also starts to decompose at room temperature and loses its effectiveness more significantly when the temperature hits 55 °C. Sodium imide doesn't start to decompose at higher temperatures.
But sodium imide can cause trouble by corroding the aluminum current collector that is typically found in a battery cell. Graphite makes a good substitute because it is immune to this assault. "The key advance for Leyden is not the electrolyte. Their magic is, they are not using aluminum as the current collector," says Venkat Srinivasan, a scientist at the Lawrence Berkeley National Laboratory who has seen the company's technology. "This change allowed them to change the electrolyte."


CloudTags: Lithium-Ion Battery, cool, battery technology, Dell inspiron mini 9 battery,Toshiba pa3098u-1bas battery, Mitac bp-8050 battery, Hp probook 4710s battery, Toshiba pa3399u-1bas battery,  Dell inspiron 1520 battery


Other Business News:
Dell inspiron 1720 battery
Dell inspiron 6400 battery
Hp 530 battery
Hp pavilion dv4 battery



Electronics Wholesale News Related Articles:
Twitter has closed deal acquired TweetDeck
IE9 for Windows Phone update is now code complete by www.wholesaleeshop.com.au
How to plug Your Batteries in By wholesaleeshop.com.au
How to charge TPS Spark battery capacity
Battery Technology for builting clean energy by www.wholesaleeshop.com.au









2011年4月23日星期六

How to improve the battery monitoring techniques?

Dealing with Redundancy
There are three ways of dealing with the potential for battery failure in data centers (and any other operation that needs an assured supply). Redundancy, planned maintenance and monitoring.
Redundancy in a system with 240 single points of failure isn't a cheap option, you can't switch out a failed cell or failed battery quick enough when the utility company supply fails; to have an N+1 system you need a complete set of batteries in parallel with the first, and a second UPS. Then how are you going to calculate the risk of a failure somewhere in that second, parallel string?
Many data centers rely on planned maintenance and asset management. Planned maintenance usually takes the form of manually testing eachToshiba pa3356u-3brs Battery,Toshiba pa3285u-3brs Battery every quarter and replacing any whose performance is significantly below the rest. The asset management part is simply talking to the supplier about the batteries, the operating conditions, how often the UPS has called on them, then taking an educated guess on when is good time to replace them all.
Batteries can fail suddenly, even one day after a quarterly test you cannot be sure they are all working properly. Increasing the testing frequency might help a little but it's a time consuming job (therefore expensive) and the testing current fed into the batteries to carry out the tests can actually have the effect of reducing their life. Asset management isn't optimal either; in order to reduce the likelihood of failure, most operations will err on the side of caution and replace costly batteries that could have remained in place a lot longer.
Predicting Failure
Stationary fixed battery monitoring systems carry out much more frequent checking, often checking more parameters than a technician with a hand-held monitor. Crucially they generate enough data to show trends in performance enabling data center staff to predict when a battery will fail and arrange to replace it in time. Using data collected on an entire string of batteries over an extended period, managers are able to make a rational decision about asset management, leaving a string in place as long as it remains economic to do so, but not so long that replacing individual batteries becomes a weekly event.
Alber and Btech are battery monitoring system providers who have been in this market for many years. Alber's system is built around a central device that is connected to the battery stack/cabinet with a custom-made wiring harness. Btech's is somewhat similar, but their latest models are more modular in design.
Cellwatch, IntelliBatt and Powershield all take a more modular approach with small data collection modules (DCM) on or near each battery. A Cellwatch DCM has seven colour-coded connections and is typically used to monitor four batteries. Each Powershield module monitors two batteries. Intellibatt has taken this approach even further and provides individual modules for each battery.
Obviously the first two require fewer modules, but the cost savings are not great since each module is more complex and therefore more expensive and the connections are more complicated. Intellibatt modules have two wires, coded red and black, to connect to the positive and negative terminals on the battery. In most cases data centers are able to fit their own Intellibatt system to an existing battery stack. Modules are 'daisy chained' with CAT5 cables to a data collection server which maybe in the battery rack, or a standard server rack elsewhere in the building.
Cellwatch and Powershield systems are able to take measurements on every Sony vgp-bps2 Battery,Sony vgp-bps2b Batteries every day, Intellibat up to four times per day. This high frequency of testing is made possible by improved digital processing techniques which enable ohmic measurement of each battery with much reduced current, therefore having little or no impact on battery life. Alber's system uses much higher test current and only performs tests once per month, Btech's system uses a lower current and tests weekly.
Using the Data
Collecting data is pointless unless you have a method of using it. Collecting data daily, then checking it once a quarter, is no better than the old quarterly inspection regime. Of course no-one wants to wade through performance stats on dozens of batteries everyday. It makes much more sense to use some basic data processing software on the server to graph performance and show trends.
Even then, someone has to look at it, and technicians with a hundred of other tasks might easily overlook something so routine and not immediately critical. To counter this, DPMC offers a remote monitoring service. Its server is able to collect data not only from Intellibatt but from all the other major systems and relay it to its offices in California. Once there it is continuously monitored to detect errors and once a week a trending report is forwarded to the data center management team. DPMC currently monitors more than a million batteries world wide.
Other Business News:
Read more:
Top 6 features that we think the Apple iPhone 5
Fast–Recharge 3-D Lithium-Ion Battery More Efficient and Charge in Minutes


2011年4月18日星期一

Digital camera battery Knowledege - Negroponte digital camera three battery

Usually a new Digital Camera Battery comes in a discharged condition and it must be charged before use (refer to your computer manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camera battery may require two to three charge/discharge cycles before achieving maximum capacity.
Canon BP-819 battery
Use a full charge cycle before recharging. All digital camera batteries in our site are Li-Ion batteries, so, they do not have memory which you might find in NiCad batteries. However, each chemistry has a limited number of charge cycles, so use a full charge cycle before re-charging to maximize your battery's usage. When charging your battery for the first time, your computer may indicate that charging is complete just after 10 or 15 minutes. Don't worry, this is normal with rechargeable Olympus PS-BLS1 battery. Just simply remove the digital camera battery from the digital camera and repeat the charging procedure.
Try To avoid over-charging, especially, do not let your digital camera battery over discharged. It is normal for digital camera notebook battery to become warm when it's charged and used. The battery exhaust much faster under the high temperature, you should avoid using your digital camera battery in shady and cool place. Hit the battery, and other acts will also accelerate depletion of battery. So, pay attention to your battery as much as possible.
1 and nimh batteries
Ni-mh battery also called hydrogen battery. It is digital camera users on the market at present the most widespread adoption of the battery, but with alkaline batteries and general, sizes and basically the same with alkaline batteries.
Advantages: can the nimh batteries battery charge, general hydrogen charging more than 1,000 times repeatedly; Versatility, and does not exist compatible with the same size, shape of alkaline batteries identical, interchangeable use.
The nimh batteries with ma, bad: with voltage hydrogen battery durability than alkaline batteries, and one-time investment more alkaline batteries big, on the market counterfeit products a lot.
Ni-mh Hp nc6100 Battery using note: ni-mh battery charge need to pay attention to, unfavorable charging for a long time; Use charger is also very important, if found battery during charging high temperature to hot, should immediately pulled out charger, stop charging.
Summary:
As digital camera products, one of the most important parts in home has related to Olympus BLS-1 battery, the feeling is very important immediate filming. So how to understand, how to choose and buy batteries battery, how to maintain and safeguard the battery topic, is always each will have a digital camera, or already deeply troubling for battery factors of people should focus on. Hope the above three aspects in this paper can bring you some inspiration.
Other Business News:

2011年4月13日星期三

Mobile batteries will enable to charge smartphones within 30 seconds

The Lithium-ion batteriesthat power our laptops and smartphones can be charged up to 90 per cent within minutes if a new battery technology fructifies.
A research team at Colorado State University has come up with the new method of producing battery electrodes with the help of metal foams.
The process has not been commercialised yet, but if and when it does, it may become possible to charge the smartphones within 30 seconds (another source says 12 minutes, which is still faster than usual charging time). These fast charging electrodes are compatible with a wide variety of Best laptop battery chemistries.
The speed with which a battery charges depends upon the movement of electrons to and from the cathodes, also called negative electrode. The research team has come up with metal foams which are covered with battery materials. The metal foam provides with the necessary conductivity, and the battery active material stores electrical energy in it.
The battery consists of nanowires, which are collected together like hairbrush bristles, with an electrolyte (chargeable) coating which in turn covered with a Lithium Hp dv9500 Batteries cathode.
Although the final product itself is not ready yet, the laboratory samples are good enough to create news. Some doubt the commercial viability of the product because the manufacturing process is complicated enough to drive the costs upward.
Other Business News:
Read More Battery Care Guide: